DUROCLAD

  • Overview
  • Colours
  • Sizes
  • Specify
  • Library

Overview

Wood Composite Cladding

Made in USA, DUROCLAD wood composite cladding is an extra tough, commercial grade composite cladding manufactured using a mixture of virgin and recycled polyethylene and recycled timber fibres. DUROCLAD wood composite cladding offers a highly practical combination of quality, durability and sustainability. It is highly suitable for external use in even the harshest of environments. Contributing to DUROCLAD wood composite cladding’s outstanding physical properties, is the use of patented Strandex technology, which offers superior structural strength and sustainability and increased UV resistance.


 

Through Coloured

DUROCLAD wood composite cladding is an integral board with the colour of the material going right through. Any scratches are very hard to see and can easily be fixed using a wire brush.

Maintenance Free

DUROCLAD wood composite cladding does not require any surface finish at the time of installation and further to this it never requires any oiling, painting or coating over the life of the product.

Secret Fixing

DUROCLAD wood composite cladding has a tongue and groove profile allowing for fast concealed fix installation ensuring no fixings are exposed.

Acoustic Rating

Laboratory acoustic testing results are available. DUROCLAD wood composite cladding is the perfect material to use on multi-residential high density developments to improve acoustics.

High Durability

DUROCLAD wood composite cladding is formulated with a mixture of virgin and recycled high density polyethylene and recycled timber fibres. It is an extremely dense and impact resistant product.

Rot & Pest Resistant

DUROCLAD wood composite cladding is guaranteed not to rot, split, warp or check. It is highly resistant to damage caused by termites and fungal decay and ideal for use in termite prone areas

CertMark Approved

DUROCLAD wood composite cladding has been independently evaluated by CertMark for BCA/NCC compliance in exterior cladding applications for added confidence and peace of mind. 

Environmentally Friendly

DUROCLAD wood composite cladding is formulated with a mixture of virgin and recycled high density polyethylene and wood dust, which promotes product longevity and environmental friendliness.
 

Colours

Cedar
Cedar
Grey
Grey
Walnut
Walnut
Redwood
Redwood

Sizes

Cladding Profiles

Specification Code: D*C11524 DUROCLAD Cladding
Specification Code: D*N11524 DUROCLAD Narrow

 

Product Range

Code

Description

Availability

MOQ

DCC11524

DUROCLAD 115 x 24mm Cedar, 5.4m Length

1-2 Weeks

20 Lengths

DGC11524

DUROCLAD 115 x 24mm Grey, 5.4m Length

1-2 Weeks 20 Lengths
DWC11524 DUROCLAD 115 x 24mm Walnut, 5.4m Length 1-2 Weeks 20 Lengths
DRC11524 DUROCLAD 115 x 24mm Redwood, 5.4m Length 1-2 Weeks 20 Lengths
DCC15515 DUROCLAD 155 x 15mm Cedar, 5.4m Length 1-2 Weeks 20 Lengths
DGC15515 DUROCLAD 155 x 15mm Grey, 5.4m Length 1-2 Weeks 20 Lengths
DWC15515 DUROCLAD 155 x 15mm Walnut, 5.4m Length 1-2 Weeks 20 Lengths
DRC15515 DUROCLAD 155 x 15mm Redwood, 5.4m Length 12-14 Weeks 180 Lengths
NARROW Narrow Look Profile, 5.4m Lengths 1-2 Weeks 20 Lengths
CUSTOM Custom Profiles & Custom Lengths  12-14 Weeks 180 Lengths

 

Accessories

Code

Description

Availability

MOQ

D*S5524 DUROSTOP 55 x 24mm End-stop, 5.4m Length Stock 1 Length
BHT507 BLACKHEAD 50mm x 7g Secret Fix Timber Screw, 200 Pack Stock 1 Pack
BHM427 BLACKHEAD 42mm x 7g Secret Fix Metal Screw, 200 Pack Stock 1 Pack
CHSE5 CHEMISYS 5 Litre End-sealer (Apply to all board ends) Stock 1 Can

 

Specify

Draft Specification

WOOD COMPOSITE CLADDING
Design, engineer, supply and install DUROCLAD wood composite cladding by BLUECHIP (Ph: 08 9451 2344) to the areas as shown on the drawings. The contractor shall provide a complete cladding system, including cladding boards, framing, fixings, end-stops, trims and other accessories required and the cladding shall be installed …………………………………………… (nominate horizontally / vertically) to the sub-frame using …………………………………………… (nominate secret-fixings / face-fixings) as per the manufacturers specifications. The cladding shall consist of a thick wood composite material manufactured from maximum 50% recycled timber fibres, maximum 20% recycled high-density polyethylene and minimum 30% virgin high-density polyethylene and shall be extruded using ‘Strandex’ technology. The cladding shall be …………………………………………… (nominate a profile/s code) with a micro-serrated finish and the colour shall be …………………………………………… (nominate a colour/s).
 

Library

  • Brochure
  • Technical Manual
  • This email address is being protected from spambots. You need JavaScript enabled to view it.
  • This email address is being protected from spambots. You need JavaScript enabled to view it.
  • This email address is being protected from spambots. You need JavaScript enabled to view it.
  • This email address is being protected from spambots. You need JavaScript enabled to view it.