CLADTRIM
- Overview
- Availability
- Gallery
- Downloads
- Support
Overview
Overview Coming Soon
ULTRACORE IQ intelligent core panel is Deemed-to-Satisfy non-combustible when tested to AS 1530.1 and AS 1530.3 as per the requirements of the NCC 2022, Clause C2D10(6)(g) and installed using the mechanical cassette-fix system as per NCC 2022, Clause C2D15(1). It has also been tested by Exova Warringtonfire to BS 8414 and AS 5113 full-scale testing to prove it does not contribute to the spread of fire. Visually, ULTRACORE IQ intelligent non-combustible core panel looks the same as traditional aluminium composite panel but with zero combustible core content (0%) meaning it achieves the lowest risk rating, category D, from the Insurance Council of Australia.
Proven V-groove Durability
Unlike 3mm SOLID aluminium, ULTRACORE IQ has 40 years of proven durability when using the common v-groove folding system. This is because the front skin is not impacted when v-grooving, as has always been intended.
AS 1530.1 Non-combustible
ULTRACORE IQ is one of the few aluminium panels globally that is Deemed-to-Satisfy non-combustible when tested to AS 1530.1 and AS 1530.3 in accordance with the NCC 2022 Clause C2D10(6)(g) requirements.
AS 5113 Fire Testing
ULTRACORE IQ is Deemed-to-Satisfy non-combustible so does not require further fire testing however it has been tested to AS 5113 full-scale testing by Exova Warrintonfire to prove it does not contribute to the spread of fire.
Zero Polyethylene Core (0%)
Unlike most other aluminium panel products including FR, Plus, A2 and NC type panels, the ULTRACORE IQ aluminium core contains ZERO percent flammable polyethylene (0%) and each lamina is 100% non-combustible.
Less Thermal Conductivity
ULTRACORE IQ aluminium core panel has a thermal conductivity of 2.54 W/mK compared to 205 W/mk for a SOLID aluminium panel. This means 80 x slower rate of heat transfer for greater fire safety and section J compliance.
Mechanical Cassette-Fixing
Compared to a SOLID aluminium panel, ULTRACORE IQ is faster and easier to fabricate using the well-proven z-angle cassette-fix system making it more cost effective and compliant with C2D15(1).
Oil-canning Resistance
Oil-canning is the uneven distribution of tension in SOLID aluminium panels which results in a rippling effect on the facade. The superior mechanical properties of ULTRACORE IQ guarantees against oil-canning.
Less Carbon, Less Weight
ULTRACORE IQ intelligent core panel is 100% recyclable and uses 50% less aluminium per m2 than 3mm SOLID aluminium for much less carbon footprint. It is also 50% lighter for significant structural and labour savings.
Availability
Cladtrim Colour-matched Trim System
CT*SS Starter Strip |
CT*ZPET Z-shape Profile |
CT*CP Universal Corner |
CT*CS Joint Cover Strip |
CT*ZPET Edge Trim Profile |
Code |
Description |
Lead Time |
MOQ |
---|---|---|---|
CT*SS | CLADTRIM J-shape Starter Strip (Insert Colour), 5.5m Length | 2-3 Weeks | 1 Length |
CT*ZPET | CLADTRIM Z-shape Joint Profile (Insert Colour), 6.5m Length | 2-3 Weeks | 1 Length |
CT*CP | CLADTRIM 40mm 2-piece Corner (Insert Colour), 5.5m Length | 2-3 Weeks | 1 Length |
CT*CS | CLADTRIM 40mm 2-piece Cover Strip (Insert Colour), 5.5m Length | 2-3 Weeks | 1 Length |
CT*ZPET | CLADTRIM 40mm 2-piece Edge Trim (Insert Colour), 5.5m Length | 2-3 Weeks | 1 Length |
CT*5050 | CLADTRIM 50 x 50mm Angle (Insert Colour), 6.5m Length | 2-3 Weeks | 1 Length |
CT*4040 | CLADTRIM 40 x 40mm Angle (Insert Colour), 6.5m Length | 2-3 Weeks | 1 Length |
CT*4020 | CLADTRIM 40 x 20mm Angle (Insert Colour), 5.8m Length | 2-3 Weeks | 1 Length |
CT*2020 | CLADTRIM 20 x 20mm Angle (Insert Colour), 5.8m Length | 2-3 Weeks | 1 Length |
(*) The asterix in the code denotes the specified type of finish to be applied to the aluminium extrusion as follows; U = Ultrawood Timber Colours, A = Anodised Colours and P = Powdercoat Colours.
Cassette-fix Z-angles & Stiffener
CTLZW58 Long Z-angle |
CTSZM58 Short Z-angle |
CT4020360 RHS Stiffener |
Code |
Description |
Lead Time |
MOQ |
---|---|---|---|
CTLZW58 |
CLADTRIM 24mm Long Z-angle (Powdercoated White), 5.8m Length |
Stock |
20 Lengths |
CTSZM58 |
CLADTRIM 22mm Short Z-angle (Mill Finish), 5.8m Length |
Stock |
20 Lengths |
CT4020360 | CLADTRIM 40 x 20 x 3mm RHS Stiffener (Mill Finish), 5.8m Length | Stock | 1 Length |
Tesa Double-sided Tape for Stiffeners
TT707815 15mm Panel Tape |
TT704412 12mm Stiffener Tape |
TT60040 Industry Cleaner |
TT60150 Adhesion Promoter |
Code |
Description |
Lead Time |
MOQ |
---|---|---|---|
TT707815 | BLUECHIP 7078 ACXplus 15mm Panel Tape, 18m Roll | Stock | 1 Roll |
TT704412 | BLUECHIP 7044 ACXplus 12mm Stiffener Tape, 25m Roll | Stock | 1 Roll |
TT60040 | BLUECHIP Tesa Industry Cleaner, 500ml Can | Stock | 1 Can |
TT60150 | BLUECHIP Tesa Adhesion Promoter, 100ml Can | Stock | 1 Can |
Gallery
Downloads
Support
Customer Support
For same day design assistance and technical support please contact our sales team directly on the below contact details. All our sales and technical staff are locally based so we can provide the best possible service and support for your project. You can also request a technical data sheet or project quotation using the below email links;
Frank Kutra |
Product Manager |
1300 945 123 |
0477 966 027 |
LinkedIn Profile |
- Overview
- Availability
- Gallery
- Downloads
- Support