Soffit Insulation Board
INSULBOARD S10 is a rigid soffit and under-slab insulation board composed of a closed-cell thermoset polyisocyanurate foam core with two reflective foil facings. Tested in accordance with AS/NZ standards to comply with BCA/NCC requirements INSULBOARD S10 is manufactured using blowing agents that are CFC/HCFC-free and have zero Ozone Depletion Potential (ODP). Providing higher R-values from less thickness, INSULBOARD S10 allows increased clearance height within carparks while giving the required thermal performance making it the instinctive option for all concrete soffit and under-slab applications.
INSULBOARD S10 has a smooth silver reflective surface providing high resistance against delamination over time and ensuring a superior looking under-slab finish.
INSULBOARD S10 meets or exceeds all mandatory standards of the NCC/BCA and is therefore suitable for all applications including cavities, concrete wall framing and soffits.
INSULBOARD S10 soffit insulation is manufactured with a CFC/HCFC free blowing agent with Zero Ozone Depletion Potential (ODP) for a greener world.
Used widely for soffit and under-slab applications on projects throughout Western Australia, INSULBOARD S10 can be specified with confidence.
INSULBOARD S10 is compliant with AS/NZS 4859.1 and relevant Australian standards, giving confidence to builders and contractors for all soffit and under-slab applications.
Composed of a uniform closed-cell polyisocyanurate foam core with two foil facings, INSULBOARD S10 is non-irritant to the skin and non-allergenic.
Group 1 Fire Performance
INSULBOARD S10 achieves Group 1 through fire engineer evaluation and is therefore suitable for use for use in carpark soffits and exposed applications.
More Cost Effective
Due to superior manufacturing technology and large volume production, INSULBOARD S10 is a more cost effective high R-value insulation than other alternatives.
INSULBOARD S10 Product Range
INSULBOARD 25mm Rigid Insulation, 2300 x 1200mm
|IBF302312||INSULBOARD 30mm Rigid Insulation, 2300 x 1200mm||R1.4||Stock||1 Board|
|IBF402312||INSULBOARD 40mm Rigid Insulation, 2300 x 1200mm||R1.9||Stock||1 Board|
|IBF502312||INSULBOARD 50mm Rigid Insulation, 2300 x 1200mm||R2.5||Stock||1 Board|
|IBF602312||INSULBOARD 60mm Rigid Insulation, 2300 x 1200mm||R3.0||Stock||1 Board|
|IBF702312||INSULBOARD 70mm Rigid Insulation, 2300 x 1200mm||R3.5||Stock||1 Board|
|IBF802312||INSULBOARD 80mm Rigid Insulation, 2300 x 1200mm||R4.0||Stock||1 Board|
|IBF902312||INSULBOARD 90mm Rigid Insulation, 2300 x 1200mm||R4.5||Stock||1 Board|
|IBF1002312||INSULBOARD 100mm Rigid Insulation, 2300 x 1200mm||R5.0||Stock||1 Board|
|ITR9650||INSULTAPE 96mm Reinforced Foil Tape, 50m Roll||NA||Stock||1 Roll|
INSULBOARD S10 Product Data
|Thermal Conductivity||W/mK||0.020 - 0.021|
|Flame Spread||AS 1530.3||0|
|Heat Release||AS 1530.3||0|
|Smoke Development||AS 1530.3||1|
|Fire Performance||CertMark||Group 1|
|Compressive Strength||ASTM C1289-12||>110|
INSULBOARD S10 Specification – Concrete Soffit
The Under-slab Insulation shall be INSULBOARD S10 ____ mm thick, composed of a closed-cell CFC/HCFC-free and zero Ozone Depletion Potential (ODP) rigid thermoset polyisocyanurate foam core with two reflective foil facings, tested in accordance with AS/NZ standards to comply with BCA/NCC and manufactured by BLUECHIP (Phone: 08 9451 2344).